craftgrrl | Beer Label Coasters (Reply)

Beer Label Coasters:

I had too much time on my hands when I found myself thirsty for the sweet taste of Michigan. So, I took action to remedy three birds with the same bandage.

Materials used:

• synthetic brush
• glue
• varnish
• felt stickers
• floor tiles
• beer labels

Step 1:
Drink a six-pack of beer.
(If you are a person on a tight schedule, like I am; I recommend combining step 1 with step 2)

Step 2:
Drive to the home improvement store.

Step 3:
Purchase synthetic brush, felt stickers, glue, clear gloss polyurethane and tiles of various size and color to match your labels. My tiles range from 3½ - 4 inches.

Step 4:
Peel label off beer bottle and glue to chosen tile. I used the brush to ensure an even spread of glue and applied pressure with a rag for a clean and flat adhesion of label to the tile. Let glue dry.

Step 5:
Coat label and tile with a coat of polyurethane and let dry. This will protect as well as make it look beautiful. Let dry and repeat step five to your liking. Personally, I did two coats of varnish on my coasters.

Step 6: Apply felt stickers to each corner on the back side of the tile. This will protect your furniture from being scratched by the coaster. (To be even more resourceful, use a straight edge to chop a wine cork and apply glue to adhere to the four corners of coaster)

Enjoy your coasters!
and in all serious, do not drink and drive. Be responsible!